Differences in Physical Properties Between POF, PE, and PVC Shrink Films

Physical Properties:

POF: Thin and tough, uniform thickness, good moisture resistance, soft texture, high tensile strength, high tear resistance, adjustable shrinkage rate, good friction resistance.
PE: Thick and uniform, good moisture resistance, soft texture, lower tear strength compared to POF but higher than PVC, poor friction resistance compared to POF.
PVC: Uneven thickness, poor moisture resistance, hard and brittle texture, low strength, low shrinkage rate, poor friction resistance.

Cold Resistance:

POF: Excellent cold resistance, remains non-brittle and non-crispy at -50°C, suitable for packaging frozen foods, maintains packaging integrity at -50°C to 95°C for long-term storage, anti-static fog treatment prevents dust contamination, keeps products fresh.
PE: Susceptible to breakage during transportation, does not become brittle after freezing in winter, anti-static treatment prevents dust contamination, keeps products fresh.
PVC: Susceptible to breakage in winter or after freezing, becomes brittle after freezing, prone to breakage during transportation, lacks anti-static treatment, prone to dust contamination, leading to product pollution.

Processing Performance:

POF: No gas generation during processing, no sealing sticking, simple maintenance and operation, suitable for high-speed automated packaging lines.
PE: No gas generation during processing, no sealing sticking, easy maintenance and operation, suitable for high-speed automated packaging lines.
PVC: Produces harmful gases during processing, does not meet environmental protection requirements, prone to mechanical damage, inconvenient operation, difficult maintenance.

Safety:

POF: Soft and non-hazardous after POF Shrink Film packaging, no sharp corners to injure hands, and friction-resistant.
PE: Soft and non-hazardous after shrink packaging, no sharp corners to injure hands.
PVC: Hard and sharp corners after shrink packaging, prone to hand injuries.

Environmental Protection and Hygiene:

POF: Non-toxic, no toxic odor during processing, compliant with FDA and USDA standards.
PE: Non-toxic, no toxic gas generation during processing, compliant with FDA and USDA standards.
PVC: Toxic, emits odor during processing, gradually being phased out.
Above are the relevant details regarding the "Differences in Physical Properties Between POF, PE, and PVC Shrink Films".